7 Great Tips to Help You Make Use Of The Miter Saw Quickly And Effectively

A miter saw is an amazing tool that provides the brisk cutting capabilities you need to slide through any type of wooden material. However, just like every other thing, an expertise is needed to get the required result you need when using it on wood and other materials.

Many professional carpenters will agree that the difference between a normal woodcutting job and an excellent one depends largely on the type of meter saw and the skills of the user. With the right kind of blade and good skills, you will be able to fine-tune a joint to make your woodwork an excellent piece of art. So, how do you make use of the meter saw to ensure a quick, efficient and perfect cut? Read on to find out.


1. Getting ready for your first cut

Via Amazon.com

If you are a newbie user, you may find it a little difficult the first time you try to squeeze the switch on the miter saw. As the blade starts rolling, the saw will jerk and whine. This is normal and you will certainly get used to it when you have done a couple of cuttings with the blade. So, do not panic or get frustrated when you are not able to handle the blade the first time.

2. Align your blade and position it properly for the right cut

The blade is the most important part of the sliding meter saw. You need to work with a blade that is sharp, strong, and flexible enough to slide through any size of wood. There are different types of blades but the most efficient are made of the best quality steel. However, a good blade will be useless without the required cutting skill applied to it. But with more practice you will learn how best to place your blade and what intensity and angle you need to cut to get the desired result.

3. Setting up the miter saw

Before making use of the miter saw, it is advisable to adjust the gauges, bevels and angles to make sure that the saw blade is properly set to the right angles. If you want to make 90 degrees cut, you may need to use a speed square to position the blade against the table. Try to carry out some test cuts to make sure that bevels and angles are properly set before making the real cut.

4. Set the miter gauges properly

Your miter gauges should have the best stop points and properly placed at 45 or 30 degree angles to help you carry out a perfect cut. Some users set their meter gauges at 52 degrees which is perfect for cutting crown and other angled molding boards. You also need to have a high quality stand to keep your tools steady while making safe and accurate cuts. Make sure you buy a stand which has extendable arms and adjustable stops to make best use of your miter saw when cutting materials.

5. Getting the blades ready

Before you start cutting, you have to wait for the blade to reach top speed. This will help you cut faster and more efficiently. Slowly lower the miter saw’s blade and keep a steady hand while you cut through the wood. After cutting the wood, grip the wood firmly and allow the blade to completely stop before raising it. This is a safety measure to take if you want to avoid any improper cutting or injuries when using the miter saw.

6. Always try to cut to the line

Before you cut, use a pencil to make a line along the area you wish to cut. Keep your saw steady and try not to deviate from the line. Here, maximum concentration is needed to get the best result.

7. Always stay safe

There is some measure of risk attached when using the miter saw. Make sure you take the right safety precautions before using the miter saw. Clamp the wood work material safety as you set the bevel and miter gauge in place. If the clamp is strong and you have a strong grip on the saw, you will surely minimize any risk of slippage or wrong direction of the blade when cutting.

Finally if you are a newbie, the first thing you need to target is accuracy. Do not bother about how fast you can cut, just concentrate on getting the appropriate cuts. As you gain more experience you will be able to cut faster and more effectively.


Click Here to Leave a Comment Below 0 comments

Leave a Reply: